Author: Rex Sosa
1. Remove passenger's side floor mat.
2. Measure 1/4" from the seat's slide handle. That should be about the center of the hole-mount. Mark the point or just guesstimate as I did. From there, measure about 1/2" on both sides of your mark. That should total an inch in width roughly. Make a slit on each side, about an inch tall. Then, make another cut at the bottom, from the left to the right slit forming a "U-cut" shape.
3. From there you should see a small hole in the shape of a box. That is where your floor mat-hook mounts. Insert the yellow tab (the mounting point for the screw). Place the hook in the appropriate position and screw down.